Eiki EIP-WX5000 Manual do Utilizador descarregar pdf (Página 53)

1 Click “Start” – “All Programs” –

“Accessories” – “Communica-

tions” – “HyperTerminal”.

• If you do not have HyperTerminal in-

stalled, see the owner’s manual of your

computer.

• Depending on the settings of your com-

puter, you may be required to enter your

area code and other details. Enter the

information as required.

2 Enter a name in the “Name” field,

and click “OK”.

3 If you are required to enter the

area code, enter it in the “Area

code” field. From the “Connect

using” drop-down menu, select

“TCP/IP (Winsock)”, and click

“OK”.

4 Enter the IP address of the pro-

jector in the “Host address” field

(see “TCP/IP” on the “Network”

menu of the projector), and en-

ter the data port of the projector

in the “Port number” field

(“10002” is the factory default

setting), and click “OK”.

Resetting the Lamp Timer of the Projector via LAN

When the projector is connected to a network, you can use the communications program to

send a command to reset the lamp timer. The example below uses Windows

XP as the oper-

ating system. When you use Windows Vista

, use other communications program referring to

the following steps, because Windows Vista

does not come with HyperTerminal.

Select

“TCP/IP (Winsock)”

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59

Sem comentários

Eiki EIP-WX5000 Manual do Utilizador Página 53