Eiki LC-X7 Manual do Utilizador descarregar pdf (Página 19)

LC-X7 Basic Serial Command Functional Specifications

19/24

7.4 Input Mode Read Command

COMMAND “CR1” [CR]

Detail Get currently selected SLOT

Acceptable “%1” [CR]

“1” = Input 1 is selected

“2” = Input 2 is selected

“3” = Input 3 is selected

“4” = Input 4 is selected

(In the case SLOT method, SLOT 1~4 is selected.)

Response

Unacceptable “?” [CR]

7.5 Lamp Time Read Command

COMMAND “CR3” [CR]

Detail Get total lamp running hours

Acceptable “%1_%2” [CR]

%1, %2

Each lamp data follows in sequence with one space between

each of them.

%1 = lamp No.1

%2 = lamp No.2

ex; “0410_0410_0410_0410” [CR]

▪▪▪▪ → Lamp No.1 = 410 Hours

Lamp No.2 = 410 Hours

Note;

-each data shall be 4 digits.

-“9999” is returned for 10000 hours or more.

Response

Unacceptable “?” [CR]

7.6 Setting Read Command

COMMAND “CR4” [CR]

Detail Get screen setting status of Ceiling/Rear.

Acceptable “%1” [CR]

“11” [CR] = Normal Screen Setting

“10” [CR] = Picture is top/bottom reversed

(Status: Rear & Ceiling ON)

“01” [CR] = Picture is left/right reversed (Status: Rear ON)

“00” [CR] = Picture is top/bottom and left/right reversed

(Status: Ceiling ON)

Response

Unacceptable “?” [CR]

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

Eiki LC-X7 Manual do Utilizador Página 19