
LC_XG400L Basic Serial Command Functional Specifications
10/24
6.5 POWER ON Command
Command “C00” [CR]
Detail
Power ON
When already Power is ON, no operation is started. When sending this
command during Countdown in process, Countdown is terminated.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.6 POWER OFF Command (Quick POWER OFF)
Command “C01” [CR]
Detail
Power OFF (Standby)
This command executes Quick Power OFF operation without displaying “Power
OFF?” message, which is displayed when Power is turned OFF with button of the
projector or remote control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.7 POWER OFF Command
Command “C02” [CR]
Detail
Power OFF (Standby)
This command works the same way as when Power is OFF with STAND-BY
button of the remote control.
(When the command is sent once, “Power OFF?” message is displayed. If this
command is sent again while “Power OFF?” message is displayed,
Power OFF
operation is executed.)
When sending this command during Countdown in process, Countdown is
terminated.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.8 INPUT 1 Command
Command “C05” [CR]
Detail
Select Input 1. This command works differently from the command by “Input 1”
key of the remote control. When Input 1 has been already selected, this
command does not execute the source switching; just for switching to Input 1.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.9 INPUT 2 Command
Command “C06” [CR]
Detail
Select Input 2. This command works differently from the command by “Input 2”
key of the remote control. When Input 2 has been selected, this command does
not execute the source switching; just for switching to Input 2.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
Comentários a estes Manuais